Lenovo B590 Hardware Maintenance Manual - Page 71
DC-in connector, 1150 System board assembly and USB board
View all Lenovo B590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
1160 DC-in connector For access, remove these FRUs in order: • "1010 Battery pack" on page 44 • "1020 Bottom slot cover" on page 44 • "1030 Optical drive" on page 45 • "1040 Memory modules" on page 46 • "1050 Hard disk drive assembly" on page 47 • "1060 PCI Express Mini Card for wireless LAN" on page 49 • "1070 mSATA solid state drive" on page 51 • "1080 Backup battery" on page 52 • "1090 Keyboard" on page 53 • "1100 Keyboard bezel" on page 56 • "1130 Microphone assembly" on page 60 • "1140 I/O board" on page 61 • "1150 System board assembly and USB board" on page 62 Removal steps of DC-in connector Detach the connector 1 . Remove the screw 2 and the DC-in connector bracket 3 . Then remove the DC-in connector in the direction shown by the arrow 4 . 1 4 2 3 4 Step 2 Screw (quantity) M2.5 × 5 mm, flat-head, nylon-coated (1) Color Black When installing: Ensure that the cable is attached firmly to the system board. Torque 4 kgf-cm Chapter 7. Removing and replacing a FRU 65