Lenovo H100 Lenovo 3000 H Series Hardware Replacement Guide V3.0 - Page 17

Removing and replacing the front bezel

Page 17 highlights

Removing and replacing the front bezel To remove and replace the front bezel: 1. Remove the computer cover. Refer to "Removing the computer cover". Note: For this procedure, it helps to lay the computer on its side. 2. Remove the front bezel by releasing the three plastic tabs inside the chassis and push the bezel outward as shown. 3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes in the chassis, and then snap it into position at the bottom and top of the chassis. 4. Refer to the "Completing the installation". 14 Hardware Replacement Guide 31040542_3000 H_HRG_EN_V3.0.indd14 14 2009.9.7 2:41:38 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

±´
Hardware Replacement Guide
Removing and replacing the front bezel
To remove and replace the front bezel:
1.
Remove the computer cover. Refer to “Removing the computer cover”.
Note:
For this procedure, it helps to lay the computer on its side.
2.
Remove the front bezel by releasing the three plastic tabs inside the chassis
and push the bezel outward as shown.
3.
To reinstall the bezel, align the plastic tabs on the bottom of the bezel with
the corresponding holes in the chassis, and then snap it into position at the
bottom and top of the chassis.
4.
Refer to the “Completing the installation”.
31040542_3000 H_HRG_EN_V3.0.indd14
14
2009.9.7
2:41:38 PM