Lenovo H520s Lenovo H520s Hardware Maintenance Manual - Page 44
Replacing the heat-sink, Remove any media disks, CDs, DVDs, or memory cards from the drives
View all Lenovo H520s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Step 6. Remove the 4 screws that secure the microprocessor fan to the heat-sink and lift up the microprocessor fan to remove it. Step 7. To install the new microprocessor fan: a. Line up the new microprocessor fan with the heat-sink and secure it to the heat-sink with 4 screws. b. Connect the microprocessor fan power cable to the connector on the board. Step 8. Reattach the computer cover. Replacing the heat-sink Note: For this procedure, it helps to lay the computer flat. To replace the heat-sink: Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. Step 2. Unplug all power cords from electrical outlets. 38 Lenovo H520sHardware Maintenance Manual