Lenovo Miix 2 11 Hardware Maintenance Manual - Lenovo Miix 2 11 - Page 43

Wireless WAN card (on select models

Get Lenovo Miix 2 11 PDF manuals and user guides View all Lenovo Miix 2 11 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Lenovo Miix 2 11 1060 Wireless WAN card (on select models) For access, remove these FRUs in order: • "1010 LCD cover" on page 31 • "1020 Volume board and power board" on page 33 • "1030 Docking transfer board" on page 34 • "1040 Touch control board, LCD cable and vibrator" on page 36 • "1050 Solid State Disk (SSD)" on page 38 Figure 6. Removal steps of wireless WAN card (on select models) Disconnect the two wireless WAN card cables (blue, red) 1. Then remove the screw 2. 2 1 Step 2 Screw (quantity) M2.0 × 2.0, flat-head, nylok-coated, Card & Thermal ASM (1) Color Black Torque 1.6~2 kgf*cm In step 1, unplug the jacks by using the removal tool antenna RF connector (P/N: 51078891), or pick up the connectors with your fingers and gently unplug them in the direction shown by the arrows. When installing: • In models with a wireless WAN card that has two antenna connectors, plug the red cable (1st) (MAIN) into the jack labeled MAIN, and the blue cable (2nd) (AUX) into the jack labeled AUX on the card. Remove the wireless WAN card in the direction shown by arrow 3. 3 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
39
Lenovo Miix 2 11
1060 Wireless WAN card (on select models)
For access, remove these FRUs in order:
•
“1010 LCD cover” on page 31
•
“1020 Volume board and power board” on page 33
•
“1030 Docking transfer board” on page 34
•
“1040 Touch control board, LCD cable and vibrator” on page 36
•
“1050 Solid State Disk (SSD)” on page 38
Figure 6. Removal steps of wireless WAN card (on select models)
Disconnect the two wireless WAN card cables (blue, red)
1
. Then remove the screw
2
.
1
2
Step
Screw (quantity)
Color
Torque
2
M2.0 × 2.0, flat-head, nylok-coated, Card &
Thermal ASM (1)
Black
1.6~2 kgf*cm
In step
1
, unplug the jacks by using the removal tool antenna RF connector
(P/N: 51078891), or pick up the connectors with your fingers and gently unplug
them in the direction shown by the arrows.
When installing:
•
In models with a wireless WAN card that has two antenna connectors, plug
the red cable (1st) (MAIN) into the jack labeled
MAIN
, and the blue cable
(2nd) (AUX) into the jack labeled
AUX
on the card.
Remove the wireless WAN card in the direction shown by arrow
3
.
3