Lenovo NetVista Hardware Maintenance Manual (HMM) for IBM NetVista 6826, 8317, - Page 25
Removing the cover, Remove the floor stand, if attached.
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Removing the cover To remove the cover: 1. Shut down the operating system, remove any media (diskettes, CDs, or tapes) from the drives, and turn off all attached devices and the computer. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. 4. Remove the floor stand, if attached. 5. Remove the padlock or cable lock if installed. 6. Remove the two thumbscrews that secure the cover at the rear of the system unit. 7. Using the handle provided at the rear, pull the cover to the rear and lift it off. Chapter 5. Installing Options 19
Removing the cover
To remove the cover:
1.
Shut down the operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2.
Unplug all power cords from electrical outlets.
3.
Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4.
Remove the floor stand, if attached.
5.
Remove the padlock or cable lock if installed.
6.
Remove the two thumbscrews that secure the cover at the rear of the system
unit.
7.
Using the handle provided at the rear, pull the cover to the rear and lift it off.
Chapter 5. Installing Options
19