Lenovo NetVista Hardware Maintenance Manual (HMM) for IBM NetVista 6826, 8317, - Page 67
Run Setup. Check Stepping level for, Run Flash Recovery using Boot Block. - bios update
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
POST Error Code 111 I/O channel parity error 114 Adapter ROM error 129 Internal cache test error 135 Fan failure 151 System board failure 161 Bad CMOS battery 162 Configuration mismatch 163 Date and Time Incorrect 164 Memory Size Error 166 Boot Block Check Sum Error 167 No Processor BIOS Update Found FRU/Action 1. Reseat adapters 2. Any adapter 3. Riser card 4. System Board 1. Adapter Memory 2. System Board 3. Riser card 1. Processor 2. L2 Cache Memory 3. System Board 1. Fan 2. System board 1. System Board 1. Run Setup 2. CMOS Backup Battery (see "Safety information" on page 109) 3. System Board 1. Run Setup and verify Configuration 2. Had a device been added, removed, changed location? If not, suspect that device. 3. Power-on external devices first, then power-on computer 4. CMOS Backup Battery (see "Safety information" on page 109) System Board 5. System Board 1. Time and Date Set 2. CMOS Backup Battery (see "Safety information" on page 109) 3. System Board 1. Run Setup. Check System Summary menu for memory size change. (See "IBM Setup Utility program" on page 9.) 2. Run the Extended Memory Diagnostic tests 1. Run Flash Recovery using Boot Block. See "Flash recovery boot block jumper" on page 105. 2. System Board 1. Run Setup. Check Stepping level for the BIOS level needed, then perform the flash update. 2. Processor Chapter 7. Symptom-to-FRU Index 61