Lenovo NetVista Hardware Maintenance Manual (HMM) for IBM NetVista 6826, 8317, - Page 28
Accessing system board components and drives, Notes
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Accessing system board components and drives To access some components on the system board such as memory, the battery, and the Clear CMOS/BIOS recovery jumper, it may be necessary to slide the diskette and CD drive tray outward to the front of the computer. To access system board components or drives: 1. Turn off the computer. 2. Remove the cover. See "Removing the cover" on page 19. 3. Remove the screw securing the drive tray to the riser card support. 4. Press in on the drive tray buttons at each side as shown, and slide tray forward to access drives. Notes: a. It may be necessary to disconnect some cables attached to the drives to allow the drive tray to slide out far enough to access some system board components. To remove the drive tray completely, disconnect all the cables attached to the diskette and CD drives. b. Make sure you note the location of any cables that you disconnect from the drives. 5. Slide the drive tray to the front just far enough to access the necessary system board component. 6. If any PCI adapters are installed, remove the PCI riser and adapter cards. Do not remove any adapters from the riser card. 22 Hardware Maintenance Manual