Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2251, 6830, and - Page 20
Alert-On LAN¬ test, Asset ID¬ test, Test results, Memory Test-Quick, Function Code, Failure Type
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
v Memory Test-Quick The quick memory test will take about 20 seconds per MB of memory and will detect solid (stuck) memory failures only. Notes: Either level of memory testing can be performed on all memory or a single SIMM or DIMM socket. Only sockets containing a SIMM or DIMM can be selected for testing. Unpopulated sockets are noted by ........ beside the test description. Alert-On LAN¬ test The Alert On LAN test does the following: v Determines if Alert On LAN is supported on the system. v Checks the revision ID register. v Verifies the EEPROM checksum. v Validates that a software alert can be sent. Asset ID¬ test The Asset ID test does the following: v Determines if Asset ID is supported on the system. v Verifies the EEPROM areas. v Performs an antenna detection test. Test results Diagnostic test results will produce the following error code format: Function Code Failure Type DeviceID Date ChkDigits Text v Function Code: Represents the feature or function within the PC. v Failure Type: Represents the type of error encountered. v DeviceID: Contains the component's unit-ID which corresponds to either a fixed disk drive, removable media drive, serial or parallel port, processor, specific SIMM or DIMM, or a device on the PCI bus. v Date: Contains the date on which the diagnostic test was run. The date is retrieved from CMOS and displayed using the YYYYMMDD format. 12 Hardware Maintenance Manual