Lenovo NetVista Hardware Maintenance Manual (HMM) for NetVista 2251, 6830, and - Page 31
CD-ROM drive jumper settings
View all Lenovo NetVista manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
gently pry the static shield loose from the drive bay. 3. Install the drive into the bay. Align the screw holes and insert the two screws. 4. Connect the power and signal cables to the drive. CD-ROM drive jumper settings CD-ROM and PC/CD-ROM drives use jumpers or tabs to set the drives as primary (master) or secondary (slave). Refer to the drive connector labels or the figures Chapter 4. Installing Options 23
gently pry the static shield loose from the drive bay.
3.
Install the drive into the bay. Align the screw holes and insert the two screws.
4.
Connect the power and signal cables to the drive.
CD-ROM drive jumper settings
CD-ROM and PC/CD-ROM drives use jumpers or tabs to set the drives as primary
(master) or secondary (slave). Refer to the drive connector labels or the figures
Chapter 4. Installing Options
23