Lenovo S10 Laptop User Guide - Page 33
Enter, Current, Password, Enabled, Password, Security, Confirm, Changing, Removing
View all Lenovo S10 Laptop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. Select Enter Current Password and type in the correct password, and press Enter thrice. Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. To set a User Password: 1. Turn on your computer. When the Lenovo logo and "Press to Setup" come up, immediately press F2 to enter the BIOS Setup Utility . 2. Select Security, using the cursor directional keys. 3. Select Set User Password, and press Enter. The Set User Password window opens. 4. Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5. Press Enter once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6. Commit your password to memory, and press Enter. 7. Press F10 to exit. 8. Select Yes in the Setup Confirmation window. Note: You can set the User Password only when the Supervisor Password has been set. Changing or Removing the User Password To change the password, do the following: 1. Select Set User Password, and press Enter. The Set User Password window opens. Chapter 2. Using your computer 25