Lenovo S40-40 Lenovo S40-40 Hardware Maintenance Manual - Page 50

Replacingthemotherboard

Page 50 highlights

Step 10. Holding the sides of the microprocessor with your fingers, remove the protective cover 1 that protects the gold contacts on the new microprocessor. 2 Step 11. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important: To avoid damaging the microprocessor contacts, keep the microprocessor completely level while installing it into the socket. Step 12. Lower the microprocessor straight down into its socket on the motherboard. Step 13. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into position with the small handle. Step 14. Use a thermal grease syringe to place 5 drops of grease on the top of the microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the grease syringe). Step 15. Reattach the heat-sink, motherboard cover, hinge fixing bracket, back cover and stand. Replacing the motherboard Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. 44 Lenovo S40-40Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71

Step 10. Holding the sides of the microprocessor with your fingers, remove the protective cover
1
that
protects the gold contacts on the new microprocessor.
2
Step 11. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the
notches on the microprocessor are aligned with the tabs in the microprocessor socket.
Important:
To avoid damaging the microprocessor contacts, keep the microprocessor completely level
while installing it into the socket.
Step 12. Lower the microprocessor straight down into its socket on the motherboard.
Step 13. To secure the microprocessor in the socket, close the microprocessor retainer and lock it into
position with the small handle.
Step 14. Use a thermal grease syringe to place 5 drops of grease on the top of the microprocessor. Each
drop of grease should be 0.03ml (3 tick marks on the grease syringe).
Step 15. Reattach the heat-sink, motherboard cover, hinge fixing bracket, back cover and stand.
Replacingthemotherboard
Note:
Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
44
Lenovo S40–40Hardware Maintenance Manual