Lenovo ThinkPad 560E TP 560Z Technical Reference Manual - Page 59

PC Card Subsystem, The Type I and Type II PC Cards can

Get Lenovo ThinkPad 560E PDF manuals and user guides View all Lenovo ThinkPad 560E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

PC Card Subsystem The system board has two PC Card slots that support the following types of PC Cards: 16 bit PC Card Type-I, II, III 5V, 3.3V CardBus PC Card Type-I, II, III 3.3V DMA is not supported. The maximum current per slot is: 500 mA at 5 V dc 500 mA at 3.3 V dc 50 mA at 12 V dc The PCI1250 PCI-to-Cardbus Controller Unit1 is used as the PC Card controller in the system unit. The available interrupt levels are IRQ 3, 4, 5, 7, 9, 10, 11, and 15. The system unit resumes operation from suspend mode when it receives the 'RI_OUT' signal. The Type I and Type II PC Cards can be installed into either the upper or the lower slot, or into both slots at the same time. The Type III PC Card, however, must be installed only in the lower slot. The Type II PC card cannot be used in the upper slot when a Type III PC Card is used. Either of the PC Card slots accepts a Zoomed Video Card with appropriate drivers provided by venders. The PC Card slots are designed according to the PC Card standard released in March 1997. 1 Manufactured by Texas Instruments Corporation. ThinkPad 560Z Subsystems 3-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
PC Card Subsystem
The system board has two PC Card slots that support the following
types of PC Cards:
±
16 bit PC Card Type–I, II, III 5V, 3.3V
±
CardBus PC Card Type–I, II, III 3.3V
DMA is not supported.
The maximum current per slot is:
±
500 mA at 5 V dc
±
500 mA at 3.3 V dc
±
50 mA at 12 V dc
The PCI1250 PCI-to-Cardbus Controller Unit
1
is used as the PC
Card controller in the system unit.
The available interrupt levels are
IRQ 3, 4, 5, 7, 9, 10, 11, and 15.
The system unit resumes operation from suspend mode when it
receives the ‘RI_OUT’ signal.
The Type I and Type II PC Cards can
be installed into either the upper or the lower slot, or into both slots
at the same time.
The Type III PC Card, however, must be installed
only in the lower slot.
The Type II PC card cannot be used in the
upper slot when a Type III PC Card is used.
Either of the PC Card slots accepts a Zoomed Video Card with
appropriate drivers provided by venders.
The PC Card slots are designed according to the PC Card standard
released in March 1997.
1
Manufactured by Texas Instruments Corporation.
ThinkPad 560Z Subsystems
3-7