Lenovo ThinkPad 560Z TP 560Z Hardware Maintenance Manual for use by Authorized - Page 12

Checkout Guide, Symptoms Verified, Go To, No Beep, Symptoms, Numeric, Error Codes, Other

Page 12 highlights

Checkout Guide Use the following procedure as a guide for computer problems. Note: The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or modified options can give false errors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation. Note: To run the diagnostics, refer to "Running the Diagnostics" on page 33. 3. Use the following table with the verified symptom to determine which page to go to. Search the symptoms column, and find the description that best matches your symptom; then go to the page shown in the "Go To" column. Symptoms (Verified) Power failure (The power indicator does not go on or stay on). POST does not complete. No beep or error codes are indicated. POST beeps, but no error codes are displayed. POST detected an error and displayed numeric error codes. The diagnostic test detected an error and displayed a FRU code. The configuration is not the same as the installed devices. Other symptoms (such as LCD display problems). Go To "Power Systems Checkout" on page 14. "Symptom-to-FRU Index" on page 21, and then use the No Beep Symptoms table. "Symptom-to-FRU Index" on page 21, and then use the Beep Symptoms table. "Symptom-to-FRU Index" on page 21, and then use the Numeric Error Codes table. "Running the Diagnostics" on page 33. "Checking the Installed Devices List" on page 35. "Symptom-to-FRU Index" on page 21, and then use the Other Symptoms table. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Checkout Guide
Use the following procedure as a guide for computer
problems.
Note:
The diagnostic tests are intended to test only IBM
products.
Non-IBM products, prototype cards, or
modified options can give false errors and invalid
system responses.
1.
Obtain the failing symptoms in as much detail as
possible.
2.
Verify the symptoms by attempting to re-create the
failure by running the diagnostic test or by repeating
the same operation.
Note:
To run the diagnostics, refer to “Running the
Diagnostics” on page
33.
3.
Use the following table with the verified symptom to
determine which page to go to.
Search the
symptoms column, and find the description that best
matches your symptom; then go to the page shown in
the “Go To” column.
Symptoms (Verified)
Go To
Power failure (The
power indicator does not
go on or stay on).
“Power Systems
Checkout” on page
14.
POST does not
complete.
No beep or
error codes are
indicated.
“Symptom-to-FRU
Index” on page
21, and
then use the
No Beep
Symptoms
table.
POST beeps, but no
error codes are
displayed.
“Symptom-to-FRU
Index” on page
21, and
then use the
Beep
Symptoms
table.
POST detected an error
and displayed numeric
error codes.
“Symptom-to-FRU
Index” on page
21, and
then use the
Numeric
Error Codes
table.
The diagnostic test
detected an error and
displayed a FRU code.
“Running the
Diagnostics” on
page 33.
The configuration is not
the same as the
installed devices.
“Checking the Installed
Devices List” on
page 35.
Other symptoms (such
as LCD display
problems).
“Symptom-to-FRU
Index” on page
21, and
then use the
Other
Symptoms
table.
10