Lenovo ThinkPad 560Z TP 560Z Hardware Maintenance Manual for use by Authorized - Page 29
Beep Symptoms
View all Lenovo ThinkPad 560Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Beep Symptoms Symptom / Error Continuous beeps. One beep and a blank, unreadable, or flashing LCD. One beep, and the message "Unable to access boot source." One long and two short beeps, and a blank or unreadable LCD. One long beep followed by four short beeps each time the Power switch is operated. (System cannot power on due to low battery voltage.) One beep every second. (System is shutting down due to low battery voltage.) Two short beeps with error codes. Two short beeps with blank screen. FRU / Action in Sequence System board. 1. Reseat the LCD connector. 2. LCD assembly. 3. System board. 1. Boot device. 2. System board. 1. System board. 2. LCD assembly. Connect the AC Adapter or install a fully charged battery. Connect the AC Adapter or install a fully charged battery. (Allow the system to completely shut down before changing the battery.) POST error. See "Numeric Error Codes" on page 21. System board. No Beep Symptoms Symptom / Error No beep, power-on indicator not on, and a blank LCD during POST. No beep, power-on indicator on, and a blank LCD during POST. No beep, power-on indicator on, and a blinking cursor only during POST. No beep during POST but system runs correctly. FRU / Action in Sequence 1. Go to "Power Systems Checkout" on page 14. 2. System board. 3. CPU Mini-Cartridge. 4. Check the power outlet. 1. System board. 2. CPU Mini-Cartridge. 1. System board. 2. CPU Mini-Cartridge. 1. Turn the volume up and check the speaker. 2. Speaker. 3. System board. ThinkPad 560Z HMM 27