Lenovo ThinkPad 560Z TP 560Z Hardware Maintenance Manual for use by Authorized - Page 70

LCD Cable and Hinges, DIMM If Installed, Battery Pack, Keyboard Bezel, Keyboard Unit

Page 70 highlights

2040 LCD Cable and Hinges DIMM (If Installed) (1020) Battery Pack (1030) Keyboard Bezel (1040) Keyboard Unit (1050) LCD Assembly (1060) LCD Front Cover (2010) LCD Panel (2020) 1 2 : LCD cable 3 4 : Hinges 43 1 2 Copper Tape 3 4 When re-installing the LCD cable, see the next page. When re-installing the left hinge, see the next page. Step Size (Quantity) Torque 1 M2.5 x 5.5 mm, brass flat-head (2) 3 kgcm 3 M2.5 x 5.5 mm, brass flat-head (3) 3 kgcm When re-installing: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver. Never use a screw that you removed. Use a new one. Make sure the screws are tightened firmly (see "Screw Tightening Information" on page 4 if you do not have a torque screwdriver). 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

2040 LCD Cable and Hinges
DIMM (If Installed)
(1020)
Battery Pack
(1030)
Keyboard Bezel
(1040)
Keyboard Unit
(1050)
LCD Assembly
(1060)
LCD Front Cover
(2010)
LCD Panel
(2020)
12
: LCD cable
34
: Hinges
1
4
4
3
3
2
When re-installing the
LCD cable, see the next page.
Copper Tape
When re-installing the
left hinge, see the next page.
Step
Size (Quantity)
Torque
1
M2.5 x 5.5 mm, brass flat-head
(2)
3 kgcm
3
M2.5 x 5.5 mm, brass flat-head
(3)
3 kgcm
When re-installing:
Make sure you use the correct screw,
and tighten all screws firmly to the torque shown in the table if
you have a torque screwdriver.
Never use a screw that you
removed.
Use a new one.
Make sure the screws are
tightened firmly
(see “Screw Tightening Information” on
page
4 if you do not have a torque screwdriver).
68