Lenovo ThinkPad 600E TP 600E User's Reference - Page 141
Message, Cause and Action, hibernation mode and the time it exited this mode, and your computer cannot
View all Lenovo ThinkPad 600E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Troubleshooting Guide Message 174 (device configuration error) 175, 177, 178 (EEPROM error) 183 (invalid password error) 184 (invalid password error) 185 (startup sequence error) 190 (critical low-battery error) 192 (cooling fan error) 195 (hibernation error) * * 196 (hibernation error) 225 (unsupported memory) 2xx (memory error) Cause and Action Make sure that the hard disk drive and the device in the UltraslimBay are firmly installed. If the problem persists, have the computer serviced. Have the computer serviced. The password entered at the supervisor password prompt is invalid. Check your supervisor password. The password entered is invalid. Power off the computer and wait at least 5 seconds; then power it on again and type the correct password. The startup sequence is invalid. Power off the computer and wait at least 5 seconds; then power it on again to reset the startup sequence in Easy-Setup. The computer powered off, because the battery is low. Connect the AC Adapter to the computer and charge the battery pack, or replace the battery pack with a fully charged one. Have the computer serviced. The system configuration differs between the time your computer entered hibernation mode and the time it exited this mode, and your computer cannot resume normal operation. Change the system configuration to what it was before your computer entered hibernation mode. If the memory size was changed, re-create the hibernation file. If you are using a docking station, undock the computer from the docking station before you enter hibernation mode. The computer cannot read the hibernation file. Have the computer serviced. The installed DIMM is not supported. Note: For example, this error occurs when you attempt to install EDO DRAM, which your computer does not support. Make sure that the DIMM option is correctly installed. Chapter 4. Solving Computer Problems 127