Lenovo ThinkPad 760CD ThinkPad 380, 385, 560, 560E, all 760, 765 and SelectADo - Page 138

How to Disable the Power-On Password 1. Power off the computer. 2. Remove the frame (see "1040 Frame" on page 160). 3. Flip the keyboard over as shown in the figure. 4. Jumper the two password jumper pads (either R364 or R39) on the system board. 5. Power on the computer to clear the password. 6. Replace the keyboard and the frame. Note: When replacing the frame, make sure the frame fits correctly. If it is not in place, the click buttons of the TrackPoint III cannot be pressed. (See the note in "1050 Keyboard Unit" on page 163.) 7. Replace the screws. 8. Power on the computer and wait until the POST ends. 9. Verify that the password prompt does not appear. To reactivate the password, set the password again. Power Shutdown Switch: The power shutdown switch resets the system regardless of the microcode status and forces the power off. Use this push button to power off when power is not completely off or the microcode is in a hung state. See "Bottom View" on page 184 for the power shutdown switch. 126 IBM Mobile Systems HMM