Lenovo ThinkPad 760CD ThinkPad 380, 385, 560, 560E, all 760, 765 and SelectADo - Page 240

FRU Code 32 33 40 42 45 50 51 60 61 62 63 70 71 72 90 91 FRU/Action External keyboard External mouse LCD assembly Video card External CRT 1. Reseat the drive (FDD-1) 2. Diskette drive (FDD-1) 1. Reseat the diskette drive (FDD-2) 2. Diskette drive (FDD-2) 1. Reseat the hard disk drive (HDD-1) 2. Hard disk drive (HDD-1) 1. Reseat the hard disk drive (HDD-3) 2. Hard disk drive (HDD-3) 1. Reseat the hard disk drive in the UltraBay (HDD-2) 2. Hard disk drive in the UltraBay (HDD-2) 1. Reseat the hard disk drive (HDD-4) 2. Hard disk drive (HDD-4) PCMCIA-2 (replicator) PCMCIA (under UltraBay) PCMCIA slot assembly CD-ROM drive External CD-ROM drive Note: The device ID and error codes are used to indicate the detail portion of the FRU which caused the error. If replacing a FRU does not correct a problem, see the device ID or error code from the previous failure. If they have changed, the cause might be because the new FRU is defective or that the FRU was incorrectly installed. If the problem remains after replacement of the FRUs, go to "Undetermined Problems" on page 235. Beep Symptoms Symptom / Error Continuous beeps. One beep and a blank, unreadable, or flashing LCD. One beep, and the message "Unable to access boot source." FRU / Action in Sequence System board 1. Reseat the LCD connector. 2. LCD assembly 3. Video card 4. System board 5. DC/DC card 1. Boot device 2. System board 228 IBM Mobile Systems HMM