Lenovo ThinkPad 760CD ThinkPad 380, 385, 560, 560E, all 760, 765 and SelectADo - Page 553

computer cannot enter suspend mode. 5. The computer does not enter suspend mode when the eject lever of the UltraBay II pops out. Events that cause the computer to resume operation from suspend mode: The LCD is opened. The real time clock alarm is signaled. The ring indicator (RI) is signaled by a serial or PCMCIA device. The Fn key is pressed. An external keyboard key is pressed while the computer is connected to ac power. Computer also exits suspend mode when timer conditions are satisfied for entering hibernation mode. Hibernation Mode For the Windows NT User Windows NT users cannot create a hibernation file in a system that uses the NTFS format system (the default format). If you want to use hibernation mode, you should reinstall Windows NT with a FAT format system. Note: Before using hibernation mode, you need a hibernation file. In hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The system is powered off. Notes: 1. In the ThinkPad Configuration program, the computer can be set to "suspend/hibernate while docked." 2. The computer cannot enter hibernation mode when: It is powered with ac power and a communication PC Card is used. It is attached to a Dock I. When the eject lever of the UltraBay II pops out. Events that cause the computer to enter hibernation mode: Hibernation mode is requested by the Fn key (Fn+F12). Timer conditions are satisfied in suspend mode. A critically low battery condition occurs. ThinkPad 770 (9548, 9549) 541