LevelOne FCS-1131 Manual - Page 34

Use PPPoE, Advanced, Web Server port, RTSP port, MJPEG over HTTP port, IPv6 Address Configuration

Get LevelOne FCS-1131 PDF manuals and user guides View all LevelOne FCS-1131 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Use PPPoE For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on the button to complete the setting. Advanced  Web Server port The default web server port is 80. Once the port is changed, the user must be notified the change for the connection to be successful. For instance, when the Administrator changes the HTTP port of the IP Camera whose IP address is 192.168.0.100 from 80 to 8080, the user must type in the web browser "http://192.168.0.100:8080" instead of "http://192.168.0.100".  RTSP port The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.  MJPEG over HTTP port The default setting of MJPEG over HTTP Port is 8008; the setting range is from 1024 to 65535.  HTTPS port The default setting of HTTPS Port is 443; the setting range is from 1024 to 65535. NOTE: Be aware to choose the different port from the one set for the web server port. IPv6 Address Configuration With IPv6 support, users can use the corresponding IPv6 address for browsing. Enable IPv6 by checking the box and click on to complete the setting. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
33
Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields, and click on
the <Save> button to complete the setting.
Advanced
Web Server port
The default web server port is 80. Once the port is changed, the user must be notified
the change for the connection to be successful. For instance, when the Administrator
changes the HTTP port of the IP Camera whose IP address is 192.168.0.100 from 80 to
8080, the user
must type in the web browser “http://192.168.0.100:8080” instead of
“
RTSP port
The default setting of RTSP Port is 554; the setting range is from 1024 to 65535.
MJPEG over HTTP port
The default setting of MJPEG over HTTP Port is 8008; the setting range is from 1024 to
65535.
HTTPS port
The default setting of HTTPS Port is 443; the setting range is from 1024 to 65535.
NOTE:
Be aware to choose the different port from the one set for the web server
port.
IPv6 Address Configuration
With IPv6 support, users can use the corresponding IPv6 address for browsing. Enable IPv6
by checking the box and click on <Save> to complete the setting.