LevelOne FCS-1131 Manual - Page 37
SNMP v1/ v2, Enable SNMP v1/ v2, Read Community, Write Community, Traps for SNMP v1/ v2, Enable
View all LevelOne FCS-1131 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
SNMP v1/ v2 Enable SNMP v1/ v2 Select the version of SNMP to use by checking the box. Read Community Specify the community name that has read-only access to all supported SNMP objects. The default value is "public". Write Community Specify the community name that has read/write access to all supported SNMP objects (except read-only objects). The default value is "write". Traps for SNMP v1/ v2 Traps are used by the IP Camera to send massages to a management system for important events or status changes. Enable Traps Check the box to activate trap reporting. Trap address Enter the IP address of the management server. Trap community Enter the community to use when sending a trap message to the management system. Trap Option Warm Start A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera, performs software reload. Click on button when complete. 36