Lexmark 5000 Color Jetprinter User Guide - Page 41
Printing from a DOS application, Printing from DOS
View all Lexmark 5000 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Printing from DOS Printing from a DOS application When you print from a DOS application, your printer uses the ESC/P printer language. You must install a printer driver for ESC/P24 J84 printing in each DOS application. In Windows 3.1, avoid switching from your DOS application to another application while your job is printing. See the README file for your Lexmark printer for more information. To print from DOS applications that run from the Windows DOS prompt: 1 Make sure you are in Windows, not native DOS. 2 Open the printer's Control Program. For help opening the Control Program, see "Opening the Control Program" on page 6. 3 Follow the steps for your operating system: Windows 3.1, 3.11, and Windows 95: a Click the Options Tab. b Make sure Disable CJ5000 DOS Printing (Enable DOS Printing to other Printers) is not checked. Windows NT 4.0: a Click the Device Settings Tab. b Make sure DOS Printing is Enabled. c Click OK. 4 Start your application from DOS. For help, see your Windows documentation. 5 Install an ESC/P24 J84 compatible driver as the current printer in the DOS application from which you are printing. For help installing a printer driver, see your application user's documentation. Printing from DOS 35