Lexmark 5500 Setup Guide - Page 14
Step3: Install printer memory and network options
View all Lexmark 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Step 3: Install printer memory and network options Removing the system board cover CAUTION: If you are installing memory or option cards after initial printer setup, turn the printer off and unplug the power cord. If you have any other devices connected to the printer, turn them off as well and unplug any cables going to the printer. You can customize your printer memory capacity and connectivity by adding optional cards or a hard disk. You must remove the system board cover to install memory cards, a firmware card, a hard disk, or an option card. You need a number 2 Phillips screwdriver to remove the system board cover. Cover 10
10
Step 3: Install printer memory
and network options
You can customize your printer memory
capacity and connectivity by adding
optional cards or a hard disk.
Removing the system board cover
You must remove the system board cover
to install memory cards, a firmware card,
a hard disk, or an option card.
CAUTION:
If you are installing memory or option cards
after initial printer setup, turn the printer off and unplug the
power cord. If you have any other devices connected to
the printer, turn them off as well and unplug any cables
going to the printer.
You need a number 2 Phillips screwdriver
to remove the system board cover.
Cover