Lexmark 5500 Setup Guide - Page 17
Installing memory, Installing a firmware card, Holding the firmware card by its
View all Lexmark 5500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installing memory Installing a firmware card 1 Unpack the memory option. 2 Open both latches on the connector. 3 Push the memory card firmly into the connector until it snaps into place. 1 Locate the holes on the system board near the option card connectors. 2 Unpack the firmware card. 3 Holding the firmware card by its sides, align the two pins on the card with the holes on the system board. 4 Push in until the firmware card is firmly in place. 13
13
Installing memory
1
Unpack the memory option.
2
Open both latches on the
connector.
3
Push the memory card firmly into
the connector until it
snaps
into
place.
Installing a firmware card
1
Locate the holes on the system
board near the option card
connectors.
2
Unpack the firmware card.
3
Holding the firmware card by its
sides, align the two pins on the
card with the holes on the system
board.
4
Push in until the firmware card is
firmly in place.