Lexmark CS943 Users Guide - Page 183
Printer Emulations, Print Configuration, Device Operations
View all Lexmark CS943 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Use printer menus 183 Menu item Description Printer Emulations PPDS Emulation Off* On Set the printer to recognize and use the PPDS data stream. Printer Emulations PS Emulation Off On* Set the printer to recognize and use the PS data stream. Printer Emulations Enable Prescribe Off* On Enable Prescribe emulation. Printer Emulations Emulator Security Page Timeout (60 minutes*) Reset Emulator After Job (Off*) Disable Printer Message Access (On*) Configure the security settings of the printer during emulation mode. Print Configuration Black Only Mode Off* On Set the printer to print always color content in grayscale . Print Configuration Color Trapping Off 1 2* 3 4 5 Enhance the printed output to compensate for misregistration in the printer. Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Device Operations Quiet Mode Off* On Change the amount of noise that the printer produces. Note: Enabling this setting slows down the overall performance of the printer. Device Operations Panel Menus Off On* Enable access to the printer menus from the control panel. Note: An asterisk (*) next to a value indicates the factory default setting.