Lexmark CS943 Users Guide - Page 201
Set Pre, Shared Key, WPA2-Personal, 1x Encryption Mode, Network Address, PCL SmartSwitch
View all Lexmark CS943 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Use printer menus 201 Menu item Set Pre‑Shared Key WPA2-Personal AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off Enable DHCPv6 On Off* Stateless Address Autoconfiguration On* Off DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix All IPv6 Addresses All IPv6 Router Addresses Network Address UAA LAA PCL SmartSwitch Off On* Description Set the password for secure Wi‑Fi connection. Enable Wi‑Fi security through WPA2. Note: This menu item appears only when the Wireless Security Mode is set to WPA2-Personal. Enable Wi‑Fi security through 802.1x standard. Note: This menu item appears only when the Wireless Security Mode is set to 802.1x - RADIUS. Enable and configure IPv4 settings in the printer. Enable and configure IPv6 settings in the printer. View the network addresses. Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu.