Lexmark CX930 Users Guide - Page 205
Print Borders, Collate, Offset s, Notes, Staple, Punch, Copy from Size, Copy to Source,
View all Lexmark CX930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Use printer menus 205 Menu item Description Print Page Borders Off* On Place a border around each image when printing multiple pages on a single page. Collate Off [1,1,1,2,2,2] On [1,2,1,2,1,2]* Print multiple copies in sequence. Offset Pages None* Between Copies Between Jobs Offset the output of each print job or each copy of a print job. Notes: • Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages is offset, such as all page 1s and all page 2s. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. • This menu item appears only when a staple, hole punch finisher is installed. Staple Off* 1 staple, top left corner 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right 4 staples Specify the staple position for all print jobs. Note: This menu item appears only when a finisher is installed. Punch Off* 2 holes 3 holes 4 holes Punch holes on the printed output. Note: This menu item appears only when a staple, hole punch finisher is installed. "Copy from" Size [List of paper sizes] Set the paper size of the original document. Note: Letter is the U.S. factory default setting. A4 is the international factory default setting. "Copy to" Source Tray [x] (1*) Multipurpose Feeder Auto Size Match Specify the paper source for the copy job. Temperature ‑4 to 4 (0*) Specify whether to generate a cooler or warmer output. Note: An asterisk (*) next to a value indicates the factory default setting.