Lexmark CX930 Users Guide - Page 238
Paper Source, Collate, Sides, Staple, Hole Punch, Offset s, Notes, Flip Style
View all Lexmark CX930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
Use printer menus 238 Menu item Description Paper Source Tray [x] (1*) Multipurpose Feeder Manual Paper Manual Envelope Set the paper source for the print job. Collate (1,1,1) (2,2,2) (1,2,3) (1,2,3)* Keep the pages of a print job stacked in sequence, particularly when printing multiple copies of the job. Sides 1‑Sided* 2‑Sided Specify whether to print on one side or both sides of the paper. Staple Specify the staple position for all print jobs. Off* 1 staple, top left corner Note: This menu item appears only when a staple finisher is installed. 2 staples, left 1 staple, top right corner 2 staples, top 1 staple, bottom left corner 2 staples, bottom 1 staple, bottom right corner 2 staples, right 4 staples Hole Punch Off* 2 holes 3 holes 4 holes Set the punch mode for all print jobs. Note: This menu item appears only when a staple, hole punch finisher is installed. Offset Pages None* Between Copies Between Jobs Offset the output of each print job or each copy of a print job. Notes: • Between Copies offsets each copy of a print job if Collate is set to On [1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages is offset, such as all pages designated as 1 and all pages designated as 2. • Between Jobs sets the same offset position for the entire print job regardless of the number of copies printed. Flip Style Long Edge* Short Edge Determine which side of the paper is bound when performing two‑sided printing. Note: An asterisk (*) next to a value indicates the factory default setting.