Lexmark CX930 Users Guide - Page 236
Auto Color Detect, Mirror Image
View all Lexmark CX930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Use printer menus 236 Advanced Imaging Menu item Description Color Balance Cyan (0*) Magenta (0*) Yellow (0*) Adjust the color intensity for cyan, magenta, and yellow. Color Dropout Color Dropout (None*) Default Red Threshold (128*) Default Green Threshold (128*) Default Blue Threshold (128*) Specify which color to drop during scanning, and adjust the dropout setting for that color. Auto Color Detect Configure the auto color detection setting. Color Sensitivity (5*) Area Sensitivity (5*) Scan Bit Depth (1 bit*) Minimum Scan Resolution (300 dpi*) JPEG Quality Best for content* 5-95 Set the JPEG quality of the scanned image. Contrast Best for content* 0-5 Specify the contrast for the scanned image. Background Removal Background Detection • Content‑based* • Fixed Level (0*) Remove the background color or image noise from the original document. Notes: • Content-based removes the background color from the original document. • Fixed removes image noise from a photo. Mirror Image Off* On Create a mirror image of the original document. Negative Image Off* On Create a negative image of the original document. Shadow Detail ‑4 to 4 (0*) Scan Edge to Edge Off* On Adjust the shadow detail in the scanned image. Scan the original document from edge to edge. Sharpness 1-5 (3*) Adjust the sharpness in the scanned image. Note: An asterisk (*) next to a value indicates the factory default setting.