Lexmark CX930 Users Guide - Page 219
VoIP Settings, Transport For Outgoing Calls
View all Lexmark CX930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Use printer menus 219 VoIP Settings Menu item Description VoIP Protocol SIP* H.323 Set the Voice over Internet Protocol (VoIP) protocol. STUN Server Specify the STUN server to traverse a firewall. Force Fax Mode Off On* Switch VoIP gateway from analog to T.38 at the beginning of a fax call. Force Fax Mode Delay 0-15 (7*) Set the time delay in seconds when sending another invite of Force Fax Mode. Note: An asterisk (*) next to a value indicates the factory default setting. SIP Settings Menu item Description Proxy Specify the IP address of the system that converts a phone number to an IP address where the fax is sent. Registrar Specify a name or IP address of the system that handles SIP client registration. User Specify the user name for the SIP proxy server. Password Specify the password used in SIP Registrar. Auth ID Specify a user name for SIP Registrar. Note: If the Auth ID setting is not set, the setting uses the user name of the User field instead. Transport For Registration UDP* TCP Set the SIP transport type for registration. Transport For Incoming Calls UDP* TCP UDP And TCP Set the SIP transport type for incoming calls. Transport For Outgoing Calls UDP* TCP Set the SIP transport type for outgoing calls. Outbound Proxy Specify an outbound proxy to forward all SIP communication. Contact Specify a contact name for SIP. Realm Specify a realm name for SIP. Note: If the Realm setting is not set, the setting uses the name of the Contact instead. SIP Registration Status Show the status of the SIP Registration. Note: An asterisk (*) next to a value indicates the factory default setting.