Lexmark E210 Service Manual - Page 24
Residual Image at 75 mm Intervals 2, mm intervals. - fuser
UPC - 734646229807
View all Lexmark E210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4510-001 Residual Image at 75 mm Intervals (2) Description: Residual image occurs at 75 mm intervals when printing card stock or transparencies. Possible cause: • Software not set to card stock or transparency mode Residual Image at 32 mm Intervals Description: Residual image occurs in the black image printing at 32 mm intervals. Possible causes: • Toner cartridge failure • Bad or dirty high voltage contacts Residual Image at 57 mm Intervals Description: Residual image occurs at 57 mm intervals. Possible causes: • Fuser temperature maintained too high. Check for toner buildup on hot roller and thermistor surface. Clean or replace fuser if necessary. 2-4 Service Manual
2-4
Service Manual
4510-001
Residual Image at 75 mm Intervals (2)
Description:
Residual image occurs at 75
mm intervals when printing card stock or
transparencies.
Possible cause:
•
Software not set to card stock or
transparency mode
Residual Image at 32 mm Intervals
Description:
Residual image occurs in the
black image printing at 32 mm intervals.
Possible causes:
•
Toner cartridge failure
•
Bad or dirty high voltage contacts
Residual Image at 57 mm Intervals
Description:
Residual image occurs at 57
mm intervals.
Possible causes:
•
Fuser temperature maintained too
high. Check for toner buildup on hot
roller and thermistor surface. Clean
or replace fuser if necessary.