Lexmark E210 Service Manual - Page 57
Pre-Transfer LED Assembly PTL, Remove the PTL.
UPC - 734646229807
View all Lexmark E210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4510-001 4. Release four snap-fits securing the sensor board and then remove the input/exit sensor board. Pre-Transfer LED Assembly (PTL) 1. Remove the transfer roller. 2. Remove the bottom metal cover and disconnect CN6 on the main board. 3. Remove the four screws securing the printhead plate. 4. Slide the printhead plate left to disengage the pick roller from the pick roller shaft. 5. Remove the two screws securing the PTL cover plate. 6. Remove the PTL. Repair Information 3-21
Repair Information
3-21
4510-001
4.
Release four snap-fits securing the sensor board and then
remove the input/exit sensor board.
Pre-Transfer LED Assembly (PTL)
1.
Remove the transfer roller.
2.
Remove the bottom metal cover and disconnect CN6 on the
main board.
3.
Remove the four screws securing the printhead plate.
4.
Slide the printhead plate left to disengage the pick roller from
the pick roller shaft.
5.
Remove the two screws securing the PTL cover plate.
6.
Remove the PTL.