Lexmark E210 Service Manual - Page 28

4510-001 Step 5 6 7 8 9 10 11 12 13 14 Paper stops or jams at various points in the printer or feeds Yes No multiple sheets Clean the feed rollers. Did this resolve the problem? Problem resolved Go to step 6 Check for loose or damaged input tray side pads. Are they in good condition? Replace the paper Replace the side feed solenoid pads Is the paper jammed inside the fuser as it exits the printer? See "Paper Path Jam 2" on page 2-10. Replace the fuser Go to step 10 Check the paper feed actuator for binding. Is it binding? Correct the binding or replace the paper feed actuator Replace the sensor board Check the paper feed actuator for damage or binds. It it damaged or binding? Correct the binding or replace the paper feed actuator Replace the LVPS Is the Paper LED on after the paper exits the printer? Go to step 11 Go to step 12 Check the exit sensor actuator for binds or damage. Is it binding or damaged? Correct the binding or replace the paper feed actuator Replace the LVPS Is the paper jammed in Replace the fuser Go to step 13 the fuser? Is the printer feeding multiple sheets? Clean the friction No problem found pad. Go to step 14 Did cleaning the Problem resolved friction pad resolve the problem? Replace the solenoid 2-8 Service Manual