Lexmark E210 Service Manual - Page 58
Pick Roller, and to the left to disconnect the pick roller assembly from
UPC - 734646229807
View all Lexmark E210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4510-001 Pick Roller There is more than one way to remove the pick roller, but the procedure below is the easiest. 1. Open the front cover, and remove the toner cartridge. 2. Remove the rear and top covers along with the paper input tray assembly. 3. Remove the four screws securing the printhead bracket to the plastic frame. 4. Lift the printhead bracket (with printhead still attached) upward and to the left to disconnect the pick roller assembly from the pick roller shaft. 5. Remove two screws securing the pick roller assembly to the printhead bracket. 6. Remove the pick roller assembly from the bracket. 3-22 Service Manual
3-22
Service Manual
4510-001
Pick Roller
There is more than one way to remove the pick roller, but the
procedure below is the easiest.
1.
Open the front cover, and remove the toner cartridge.
2.
Remove the rear and top covers along with the paper input tray
assembly.
3.
Remove the four screws securing the printhead bracket to the
plastic frame.
4.
Lift the printhead bracket (with printhead still attached) upward
and to the left to disconnect the pick roller assembly from the
pick roller shaft.
5.
Remove two screws securing the pick roller assembly to the
printhead bracket.
6.
Remove the pick roller assembly from the bracket.