Lexmark E210 Service Manual - Page 56
Main Board and Input/Exit Sensor Board, To remove the input/exit sensor board, release four snap-fits
UPC - 734646229807
View all Lexmark E210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4510-001 Main Board and Input/Exit Sensor Board 1. Before removing the main board, remove the rear cover, metal bottom cover, and the LVPS board. 2. Unplug all connectors, remove two screws from the main board, and then remove the board. 3. To remove the input/exit sensor board, release four snap-fits securing the insulator and then remove the insulator. 3-20 Service Manual
3-20
Service Manual
4510-001
Main Board and Input/Exit Sensor Board
1.
Before removing the main board, remove the rear cover, metal
bottom cover, and the LVPS board.
2.
Unplug all connectors, remove two screws from the main board,
and then remove the board.
3.
To remove the input/exit sensor board, release four snap-fits
securing the insulator and then remove the insulator.