Lexmark E250DN Service Manual - Page 134
Transfer roll removal, With a hand at each end, lift the transfer roll out.
UPC - 734646062992
View all Lexmark E250DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
4512-220, -230 Transfer roll removal Note: A flashlight may be required to remove the transfer roll. 1. Open the front access cover. 2. Place a clean piece of paper around the transfer roll to protect it from finger oils. Note: Do not touch the transfer roll with bare hands. Contaminants can damage the roll. 3. At the right side of the transfer roll, squeeze the holder arms with the left hand while lifting. Stop when the holder is unlatched. 4. At the left side of the transfer roll, squeeze the holder arms with the right hand while lifting with the left hand. Stop when the left holder is unlatched. 5. With a hand at each end, lift the transfer roll out. Note: Do not try removing the spring on the left; it is not removeable but can be dislodged. The spring included with the FRU is to be used only if the old right-side spring is damaged or lost. Both springs must be positioned on posts that cannot be seen. If the old springs are moved, feel the base of the springs to assure that they are on the posts. The top of the springs must be captured in the bearings of the transfer roll. 4-42 Lexmark™ E250d and E250dn