Lexmark E260D User Guide - Page 100
Warning-Potential Damage, CAUTION-HOT SURFACE, If the paper is not easy to remove
UPC - 734646084079
View all Lexmark E260D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
2 Lift and pull the unit containing the photoconductor kit and the toner cartridge out of the printer. Set the unit aside on a flat, clean surface. Warning-Potential Damage: Do not touch the photoconductor on the underside of the photoconductor kit. Use the cartridge handle whenever you are holding the cartridge. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 3 Remove the jammed paper. Note: If the paper is not easy to remove, then open the rear door to remove the paper. 4 Align and reinstall the unit. Clearing jams 100
2
Lift and pull the unit containing the photoconductor kit and the toner cartridge out of the printer. Set the unit aside
on a flat, clean surface.
Warning—Potential Damage:
Do not touch the photoconductor on the underside of the photoconductor kit. Use
the cartridge handle whenever you are holding the cartridge.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
3
Remove the jammed paper.
Note:
If the paper is not easy to remove, then open the rear door to remove the paper.
4
Align and reinstall the unit.
Clearing jams
100