Lexmark E360 Quick Reference - Page 4
Loading the multipurpose feeder
![]() |
View all Lexmark E360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
3 Grasp the handle, and pull the extension so it flips forward. Loading the multipurpose feeder 1 Squeeze the tab located on the right width guide, and move the guides out fully. • Flex a stack of envelopes back and forth to loosen them, and then fan them. Straighten the edges on a level surface. 4 Guide the extension down gently so the multipurpose feeder is extended fully and open. 2 Prepare the paper or specialty media for loading. • Flex sheets of paper or paper labels back and forth to loosen them, and then fan them. Do not fold or crease the paper or labels. Straighten the edges on a level surface. Note: Fanning prevents the edges of envelopes from sticking together. It also helps them feed properly to avoid jams. Do not fold or crease envelopes. 3 Load the paper or specialty media. Notes: • Do not force any paper into the multipurpose feeder. Overfilling may cause jams. • Do not exceed the maximum stack height by forcing paper or specialty media under the stack height limiters which are located on the guides. • Hold transparencies by the edges, and then fan them. Straighten the edges on a level surface. Note: Avoid touching the print side of the transparencies. Be careful not to scratch them. 4
![](/manual_guide/products/lexmark-e360d-quick-reference-730cc49/4.png)