Lexmark Forms Printer 2500 User's Guide - Page 14
Printing a network setup Printing from Windows or DOS, Windows - series drivers
View all Lexmark Forms Printer 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Printing a network setup page If the printer is attached to a network, print a network setup page to verify the network connection and find the printer address. Note: This function is disabled if a USB cable is connected. 1 Make sure the printer is on and paper is loaded. 2 With a paper clip or the tip of a pen, press the recessed button located just above the Network connection. The network setup page prints. Warning-Potential Damage: Do not touch the Network connector except when the printer is turned off. 3 Check the first section on the network setup page, and confirm that the status is Connected. If the status is Not Connected, the LAN drop may not be active, or the network cable may be malfunctioning. Consult a system support person for a solution, and then print another network setup page. 4 Check the network setup page to find the IP Address and the Fully Qualified Domain Name. The Fully Qualified Domain Name is useful in situations where the Address changes. For instance, the Address changes if the printer is moved; however, the Fully Qualified Domain Name does not change. Note: The network setup page also provides important network configuration information. Printing from Windows or DOS Windows When printing from a Windows application, use the Windows Forms Printer 2500 Series driver available from the Lexmark Web site at www.lexmark.com. DOS Follow the instructions that came with your DOS application to see what printer drivers are supported for your level of DOS. Most applications let you specify the type of printer you are using so the application can take full advantage of the printer features. Learning about the printer 14