Lexmark Forms Printer 2500 User's Guide - Page 84

optional Tractor 2 Feeder positions paper incorrectly 71 paper fed from Auto Sheet Feeder is skewed 72 paper fed in Auto Sheet Feeder jams at printer entrance 70 paper jammed in Auto Sheet Feeder 70 printer does not feed from Auto Sheet Feeder 71 printer does not feed paper 70 paper feed, troubleshooting Auto Sheet Feeder feeds at incorrect rate 71 paper paths pull tractor 25 push tractor 25 paper sizes supported by the printer 43 paper types supported by the printer 43 pitch locking 22 selecting 22 pitch lock disabling 22 print quality troubleshooting characters are wrong or missing 74 dots are missing or print quality is poor 73 graphics do not print 74 incorrect line length 68 incorrect line spacing or overprinting occurs 75 incorrect number of lines on a page 74 lines do not start at left margin 68 print is too light 73 printer goes to Tear Off position before job finishes 67 smudged forms or print too dark 74 specified font or pitch is not printing or is changing 69 print troubleshooting buttons do not work 68 incorrect characters print, left margin changes, or printing stops 69 left margin moves right during printing 68 Print test works, but printer does not print when attached to the computer 66 printer alarm sounds 67 printer is noisy 67 printer power switch is on, but the power light is off 68 printer sounds like it is printing, but does not print 67 printer speed slows 68 printing continues beyond edges of continuous forms 69 printer cleaning 57 features and functions 10 overview 8 parts 8 test 62 printer status checking 63 printer test page interrupting or stopping 62 running 62 printing demonstration page 12 from DOS 14 from Windows 14 network setup page 14 pull position tractor 44 pull tractor converting 46 paper paths 25 push position tractor 44 push tractor converting 45 paper paths 25 R recycling Lexmark products 58 WEEE statement 79 ribbon cartridge removing 57 S safety information 7 security supporting IPSec 60 supporting SNMPv3 60 using 802.1x authentication 61 setting Top-Of-Form 40, 41, 42 Setup mode Control options 54 Data options 52 Emulation options 55 Forms Macro options 51 Interface options 56 Main menu options 50 using 48 SNMPv3 60 supplies ordering 57 T Tear Off function using 25 Tear Off position setting 25 Top-Of-Form setting 40, 41, 42 tractor pull position 44 push position 44 Tractor mode selecting 21 troubleshooting checking an unresponsive printer 62 contacting Customer Support 75 restoring factory default settings 59 troubleshooting, jams and misfeeds paper is jammed in the printer 69 troubleshooting, paper feed Auto Sheet Feeder feeds at incorrect rate 71 Auto Sheet Feeder feeds multiple sheets 72 Auto Sheet Feeder positions paper incorrectly 72 incorrect Top-Of-Form position 71, 72 jam in Tractor 2 Feeder 70 optional Tractor 2 Feeder does not feed 71 Index 84