Lexmark MS617 Users Guide PDF - Page 23
Installing a printer hard disk, CAUTION-SHOCK HAZARD, Warning-Potential Damage
View all Lexmark MS617 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Additional printer setup 23 14 Close the shield. 15 Close the ISP exterior cover. Note: When the printer software and any hardware options are installed, it may be necessary to manually add the options in the printer driver to make them available for print jobs. For more information, see "Adding available options in the print driver" on page 29. Installing a printer hard disk Note: This option is available only in MS610de printer model. CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any controller board electronic components or connectors. 1 Access the controller board. For more information, see "Accessing the controller board" on page 71 Note: This task requires a flathead screwdriver. 2 Unpack the printer hard disk. 3 Install the printer hard disk on the controller board: Warning-Potential Damage: Hold only the edges of the printed circuit board assembly. Do not touch or press on the center of the printer hard disk. Doing so may cause damage.