Lexmark MS617 Users Guide PDF - Page 59

Using MS510dn, MS517dn, MS610dn, and MS617dn 59 Printing a network setup page If the printer is attached to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the printer control panel, navigate to: > Settings > Reports > > Network Setup Page > Note: If an optional internal print server is installed, then Print Network [x] Setup Page appears. 2 Check the first section of the network setup page, and confirm that the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page. Checking the status of parts and supplies Checking the status of parts and supplies on the printer control panel From the printer control panel, navigate to: > Status/Supplies > > View Supplies > Checking the status of parts and supplies from the Embedded Web Server Note: Make sure the computer and printer are connected to the same network. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Device Status > More Details. Saving energy Using Eco‑mode Use Eco‑Mode to quickly select one or more ways to reduce your printer's environmental impact. 1 From the printer control panel, navigate to: > Settings > Settings > > General Settings > > Eco‑Mode > > select the setting you want