Lexmark MS811 Quick Reference - Page 23
[x]- jam, open upper and lower rear door. [231–234], remove standard bin jam. [203]
![]() |
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, open upper and lower rear door. [231-234] CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 1 Pull down the rear door. 3 Close the rear door. 4 Push the back of the standard tray. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 5 Press down the rear duplex flap, then firmly grasp the jammed paper, and then gently pull the paper out. 23 Note: Make sure all paper fragments are removed. 2 1 6 Insert the standard tray. 7 Do either of the following to clear the message and continue printing: • For touch‑screen printer models, touch or Done. • For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > . [x]‑page jam, remove standard bin jam. [203] 1 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed.
![](/manual_guide/products/lexmark-ms810-quick-reference-dd9de42/23.png)