Lexmark MarkNet N4050e User's Guide for Windows - Page 26

Installing your printer on the network

20


Once the print server has been configured, use the printer drivers CD or printer software CD that

came with your printer to install the printer on the computers attached to your network.

•

Make sure that your printer drivers CD or printer software CD is inserted into the computer

you want to install the printer for.

•

When installing the printer, follow the

Network

installation path. This process may vary

between different printers.

Installing your network printer on additional network computers

If you are installing your network printer for use with multiple computers on the network, you will need

to repeat the


process for each computer you want to have

access to the printer. The wireless print server does not need to be reconfigured for each successive

installation.

Section	Page
Getting started	7
Unpacking your print server	7
Wireless network settings	9
Setting up your wireless print server	10
Setup overview	10
Minimum requirements	11
Safety information	12
Select a location for your print server	12
Configuring your wireless print server	12
Changing your wireless print server settings	19
Troubleshooting	20
Indicator light status	20
The Setup Utility CD does not auto launch	20
The Setup Utility Wizard was not able to communicate with the print server	21
My network key was invalid	21
My wireless print server was unable to join the network	21
The print server was configured correctly, but cannot be found on the network	22
No printer was found attached to the print server	22
My network printer does not print	22
The correct print server listing is not present when running the printer software or drivers CD	23
Advanced Setup	24
Configuring the print server in Ad-Hoc mode	24
Installing your printer on the network	26

Lexmark MarkNet N4050e User's Guide for Windows - Page 26

Installing your network printer on additional network computers

Page 26 highlights