Lexmark MarkNet N7000e User Guide - Page 7

Setup, If your printer is, Refresh, Specify Printer by Address/Hostname

Get Lexmark MarkNet N7000e PDF manuals and user guides View all Lexmark MarkNet N7000e manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Setup If your printer is not shown in the Printers Found on Local Network list... 1 Make sure: • The print server LCD is on. • The print server is properly connected to the network (check the Ethernet cable). • The printer is turned on. • The printer is properly connected to the print server (check the USB or parallel cable). • There is not a problem with the printer, USB, or parallel cable. • There is not a problem with your network. 2 Click Refresh to search the network again. 3 Click Back. 4 Select Specify Printer by Address/Hostname. 5 Enter the IP Address/Hostname and Port information. 6 Click Next. 7 Continue following the instructions on screen. Understanding the Setup Utility software 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Understanding the Setup Utility software
5
Setup
If your printer is
not
shown in the Printers Found on Local Network list...
1
Make sure:
•
The print server LCD is on.
•
The print server is properly connected to the network (check the Ethernet cable).
•
The printer is turned on.
•
The printer is properly connected to the print server (check the USB or parallel cable).
•
There is not a problem with the printer, USB, or parallel cable.
•
There is not a problem with your network.
2
Click
Refresh
to search the network again.
3
Click
Back
.
4
Select
Specify Printer by Address/Hostname
.
5
Enter the IP Address/Hostname and Port information.
6
Click
Next
.
7
Continue following the instructions on screen.