Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 188
Connectivity and network management, flashing, Setup, Guide, ers, MarkVision and Utilities
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
The following table provides more information about the MarkNet internal print servers and their topologies. MarkNet N2000 Series of internal print servers Adapter N2000t N2001e N2002e N2501e Topology Token-Ring RJ-45 UTP Token-Ring DB9 STP Ethernet 10BaseT/100BaseTX RJ-45 UTP Ethernet 10BaseT RJ-45 UTP Ethernet 10Base2 BNC thin coax Ethernet 10BaseT/100BaseTX RJ-45 UTP SCSI interface Modem Note: This option is only available with the OptraImage package. MarkNet S internal print servers Adapter MarkNet S Ethernet 10Base2/T MarkNet S 10BaseT/100BaseTX MarkNet S Token-Ring 16/4MBps Topology Ethernet 10BaseT RJ-45 UTP Ethernet 10Base2 BNC thin coax Ethernet 10BaseT/100baseTX RJ-45 UTP 16/4 Token-Ring-9-pin D-shell STP connector and RJ-45 UTP connector Periodically Lexmark releases updates to the firmware which may provide new functions or support for new network protocols. Update the firmware at any time by flashing, or reprogramming, the flash memory in the adapter. Simply download the most current flash files from the Lexmark Web site (www.lexmark.com) free of charge. Use FTP commands or MarkVision to flash the print server. Refer to the documentation that came with your print server for more information on flashing. For information about installing internal print servers and tri-port cards, refer to the Setup Guide. For information about setting up a printer for a particular network, refer to the Drivers, MarkVision and Utilities CD that ships with the printer. Connectivity and network management 188