Lexmark Monochrome Laser Complete Printer Reference (1.7 MB) - Page 59

Setup Menu (continued) Menu item Auto Continue * Factory default Printer setting = Disabled* = 5...255 Auto Continue defines the amount of time (between 5 and 255 seconds) the printer waits after detecting one of the following errors before it resumes printing: 35 Res Save Off Deficient Memory 37 Insufficient Collation Area 37 Insufficient Defrag Memory 37 Insufficient Memory - Held Jobs may be lost. Go/Stop? 38 Memory Full 39 Complex Page 51 Defective Flash 52 Flash Full 53 Unformatted Flash 54 Network x Software Error 54 Serial Option x Error 54 Std Par ENA Connection Lost 54 Ser x Fax Connection Lost 54 Par x ENA Connection Lost 55 Insufficient Fax Buffer 56 Serial Port x Disabled 56 Std Parallel Port Disabled 56 Parallel Port x Disabled 58 Too Many Flash Options 58 Too Many Disks Installed 61 Defective Disk 62 Disk Full 63 Unformatted Disk Insert Stapler Operation Failed Jobs on Disk Priming Failed Faxes on Disk Priming Failed, Retry. Go/Stop Print Jobs on Disk. Go/Stop If one of these errors occurs and Auto Continue is set to Disabled, the printer stops and waits for operator intervention. This setting is also used as a timer. After an inactive period in the menus, the printer automatically exits the menus and returns to Ready. Changing printer settings 59