Lexmark T430 Service Manual - Page 46
User attendance messages continued
![]() |
View all Lexmark T430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4048-1xx User attendance messages (continued) Message Explanation Change Check Tray x Connection This message displays when the user should change the media installed in one of the input options. • =Tray 1, Tray 2, Tray 3, or MP feeder. • =Bond, Card stock, Colored, Envelope, Labels, Ltrhead, Plain, Preprint, or Transparency. • =letter, legal, B5, A4, Executive, Universal, A5, Folio, or Statement. For envelopes, =7¾ Envelope, 9 Envelope, 10 Envelope, DL Envelope, C5 Envelope, B5 Envelope, or other Envelope. Tray x=Tray 2 or Tray 3. This messages displays for the following conditions: • The specified device may have been removed from the printer, possibly to clear a paper jam or to uninstall the option. • The option may be attached to the printer, but a communications problem may prevent the printer from detecting the option. For example, there may be a poor connection or a hardware failure. The following actions may be taken: • If the option was temporarily removed or not connected properly, reattach or reconnect it. • Press Go to execute a configuration change which notifies the printer the option has been hot unplugged (removed with the power on). Note: This action is not available if the printer is in Diagnostics Mode or running diagnostics. • If the device is experiencing a hardware problem, turn the printer off and on. Close Door Close the upper front door. 2-12 Service Manual
![](/manual_guide/products/lexmark-t430-service-manual-2c3b02d/46.png)