Lexmark X642E Menus and Messages - Page 46
Memory Full, the PCL XL or PostScript interpreters. If - password reset
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Using MFP menus Menu item Printer Language Print Area Download Target Resource Save Banner Page Purpose Values and descriptions Specifies the default printer language used to communicate data from the computer to the MFP. Note: This menu item is not available from the LCD. It is only available on the MFP Embedded Web Server.Setting a printer language as the default does not prevent a software application from sending print jobs that use the other language. PCL Emulation* PS Emulation PCL emulation-Uses a PCL interpreter for incoming host communications. PostScript emulation-Uses a PS interpreter for incoming host communications. Modifies the logical and physical printable area. Note: This menu item is not available from the LCD. It is only available on the MFP Embedded Web Server. Normal* Fit to Page Whole Page Note: The Whole Page setting only affects pages printed using PCL 5 interpreter. This setting has no effect on pages printed using the PCL XL or PostScript interpreters. If attempting to print any data in the nonprintable area defined by Normal Print Area, the MFP clips the image at the boundary defined by the Normal defined printable area. Specifies the storage location for downloaded resources. Storing downloaded resources in flash memory is permanent storage rather than the temporary storage that RAM provides. The resources remain in the flash memory even when the MFP is turned off. Note: This menu item is not available from the LCD. It is only available on the MFP Embedded Web Server. RAM* Flash All downloaded resources are automatically stored in printer memory (RAM). All downloaded resources are automatically stored in flash memory. Note: Flash appears as a menu item if a formatted, nondefective optional flash memory card which is not Write or Read/Write password protected is installed. Specifies what the MFP does Off* with downloaded resources, such as fonts and macros stored in RAM, if the MFP receives a job that requires more memory than is On available. Note: This menu item is not available from the LCD. It is only available on the MFP Embedded Web Server. The MFP retains downloaded resources only until memory is needed. It then deletes those resources associated with the inactive printer language. The MFP retains all downloaded resources for all printer languages during language changes and MFP resets. If the MFP runs out of memory, 38 Memory Full appears. Specifies if the print job Off* should be printed as a Banner Page. On Note: This menu item is not available from the LCD. It is only available on the MFP Embedded Web Server. To set to Off, clear the check box. To set to On, select the check box. Settings 46