Lexmark X73 Getting Started - Page 20
Troubleshooting, The printer may have a paper jam - power supply
UPC - 734646611039
View all Lexmark X73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting When your printer has a problem, first make sure: • The power supply is plugged into your printer and an electrical outlet. • The USB cable is securely attached to your computer and your printer. • Your computer is turned on. • Your printer is turned on. • The sticker and transparent tape covering the bottom of the cartridge are removed. If the status light on your printer is blinking, there may be a paper jam, the printer may be out of paper, or the cartridge carrier may have stalled. For help, see the following topics: The printer may have a paper jam Remove the paper from the printer. If the paper is lodged too far into the printer and cannot be removed: 1 Press the Power button to turn the printer off. 2 Pull firmly on the paper to remove it. If you cannot reach the paper because it is too far into the printer: a Open the cartridge door and pull the paper out. b Close the cartridge door. 3 Press the Power button to turn the printer on, and then send your document to print. 15